IfxMultican_Can.h File Reference

MULTICAN CAN details. More...

#include "Multican/Std/IfxMultican.h"
#include "Scu/Std/IfxScuCcu.h"
#include "IfxScu_regdef.h"

Go to the source code of this file.

Data Structures
struct	IfxMultican_Can_GatewayConfig
	Structure for gateway configuration. More...
struct	IfxMultican_Can_InterruptConfig
	Structure for interrupt configuration. More...
struct	IfxMultican_Can_InterruptSource
	Structure for interrupt source. More...
struct	IfxMultican_Can_MsgObjControl
	Message object control. More...
struct	IfxMultican_Can_Node
	CAN node handle data structure. More...
struct	IfxMultican_Can
	CAN handle data structure. More...
struct	IfxMultican_Can_Config
	CAN module configuration. More...
struct	IfxMultican_Can_MsgObj
	CAN message object handle data structure. More...
struct	IfxMultican_Can_MsgObjConfig
	CAN message object configuration. More...
struct	IfxMultican_Can_NodeConfig
	CAN Node configuration. More...

Functions
IFX_INLINE void	IfxMultican_Can_deinit (IfxMultican_Can *mcan)
	Reset the CAN module. Reset and disable the CAN module, inclusive message object and node registers. More...
IFX_EXTERN void	IfxMultican_Can_getConfig (IfxMultican_Can *mcan, IfxMultican_Can_Config *config)
	Return the actual CAN module configuration. More...
IFX_EXTERN float32	IfxMultican_Can_getModuleFrequency (IfxMultican_Can *mcan)
	Get the module frequency. More...
IFX_EXTERN IfxMultican_Status	IfxMultican_Can_initModule (IfxMultican_Can *mcan, const IfxMultican_Can_Config *config)
	Initialize the CAN module The following configuration is used: . More...
IFX_EXTERN void	IfxMultican_Can_initModuleConfig (IfxMultican_Can_Config *config, Ifx_CAN *mcan)
	Return the default MULTICAN configuration. More...
IFX_INLINE void	IfxMultican_Can_Node_activate (IfxMultican_Can_Node *node)
	Activate the CAN Node. Participate in the CAN bus activities. More...
IFX_INLINE void	IfxMultican_Can_Node_deactivate (IfxMultican_Can_Node *node)
	Deactivate the CAN Node. Take out from participation in the CAN bus activities. More...
IFX_INLINE void	IfxMultican_Can_Node_deinit (IfxMultican_Can_Node *node)
	Reset the CAN node. More...
IFX_INLINE IfxMultican_Status	IfxMultican_Can_Node_recoverBusOff (IfxMultican_Can_Node *node)
	Recovers the CAN node from bus off. More...
IFX_EXTERN void	IfxMultican_Can_Node_getConfig (IfxMultican_Can_Node *node, IfxMultican_Can_NodeConfig *config)
	Get the actual message object configuration. More...
IFX_EXTERN IfxMultican_Status	IfxMultican_Can_Node_init (IfxMultican_Can_Node *node, const IfxMultican_Can_NodeConfig *config)
	Initialize the CAN node. More...
IFX_EXTERN void	IfxMultican_Can_Node_initConfig (IfxMultican_Can_NodeConfig *config, IfxMultican_Can *mcan)
	Get default CAN node configuration. More...
IFX_EXTERN void	IfxMultican_Can_Node_sendToBusOff (IfxMultican_Can_Node *node)
	Sends the CAN node into bus off. More...
IFX_INLINE boolean	IfxMultican_Can_MsgObj_cancelSend (IfxMultican_Can_MsgObj *msgObj)
	Cancel pending TX request by invalidating the request Only when frame transmission has not been started. More...
IFX_INLINE void	IfxMultican_Can_MsgObj_clearRxPending (IfxMultican_Can_MsgObj *msgObj)
	Clear the RX pending flag of a message object. More...
IFX_INLINE void	IfxMultican_Can_MsgObj_clearTxPending (IfxMultican_Can_MsgObj *msgObj)
	Clear the TX pending flag of a message object. More...
IFX_INLINE void	IfxMultican_Can_MsgObj_deinit (IfxMultican_Can_MsgObj *msgObj)
	Reset the message object Append the message object to the end of idle list and reset message object registers. More...
IFX_INLINE IfxMultican_MsgObjId	IfxMultican_Can_MsgObj_getPendingId (IfxMultican_Can_MsgObj *msgObj, IfxMultican_MsgObjGroup msgObjGroup)
	Get message object ID which has TX/RX pending flag from a message object group. More...
IFX_INLINE IfxMultican_MsgObjStat	IfxMultican_Can_MsgObj_getStatus (IfxMultican_Can_MsgObj *msgObj)
	Get the message object status. More...
IFX_EXTERN void	IfxMultican_Can_MsgObj_getConfig (IfxMultican_Can_MsgObj *msgObj, IfxMultican_Can_MsgObjConfig *config)
	Get the actual message object configuration. More...
IFX_EXTERN IfxMultican_Status	IfxMultican_Can_MsgObj_init (IfxMultican_Can_MsgObj *msgObj, const IfxMultican_Can_MsgObjConfig *config)
	Initialize the message object. More...
IFX_EXTERN void	IfxMultican_Can_MsgObj_initConfig (IfxMultican_Can_MsgObjConfig *config, IfxMultican_Can_Node *node)
	Initialise message config with default values and the given parameters. More...
IFX_EXTERN boolean	IfxMultican_Can_MsgObj_isRxPending (IfxMultican_Can_MsgObj *msgObj)
	Returns the RX pending flag of a message object. More...
IFX_EXTERN boolean	IfxMultican_Can_MsgObj_isTransmitRequested (IfxMultican_Can_MsgObj *msgObj)
	Returns the TX Request flag of a message object. More...
IFX_EXTERN boolean	IfxMultican_Can_MsgObj_isTxPending (IfxMultican_Can_MsgObj *msgObj)
	Returns the TX pending flag of a message object. More...
IFX_EXTERN IfxMultican_Status	IfxMultican_Can_MsgObj_readMessage (IfxMultican_Can_MsgObj *msgObj, IfxMultican_Message *msg)
	Read a received CAN message. More...
IFX_EXTERN IfxMultican_Status	IfxMultican_Can_MsgObj_sendMessage (IfxMultican_Can_MsgObj *msgObj, const IfxMultican_Message *msg)
	Send a CAN message. More...

Detailed Description

MULTICAN CAN details.

Version

iLLD_1_0_0_11_0

Copyright

Copyright (c) 2013 Infineon Technologies AG. All rights reserved.

                            IMPORTANT NOTICE

Infineon Technologies AG (Infineon) is supplying this file for use exclusively with Infineon's microcontroller products. This file can be freely distributed within development tools that are supporting such microcontroller products.

THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. INFINEON SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

Definition in file IfxMultican_Can.h.