|
enum | IfxDsadc_AuxCombFilterShift {
IfxDsadc_AuxCombFilterShift_noShift = 0,
IfxDsadc_AuxCombFilterShift_shiftBy1 = 1,
IfxDsadc_AuxCombFilterShift_shiftBy2 = 2,
IfxDsadc_AuxCombFilterShift_shiftBy3 = 3
} |
| Comb Filter (auxiliary) shift control
Definition in Ifx_DSADC.FCFGA.B.AFSC. More...
|
|
enum | IfxDsadc_AuxCombFilterType {
IfxDsadc_AuxCombFilterType_comb1 = 0,
IfxDsadc_AuxCombFilterType_comb2 = 1,
IfxDsadc_AuxCombFilterType_comb3 = 2,
IfxDsadc_AuxCombFilterType_combF = 3
} |
| Comb Filter (auxiliary) configuration/type
Definition in Ifx_DSADC.FCFGA.B.CFAC. More...
|
|
enum | IfxDsadc_AuxEvent {
IfxDsadc_AuxEvent_everyNewResult = 0,
IfxDsadc_AuxEvent_insideBoundary = 1,
IfxDsadc_AuxEvent_outsideBoundary = 2
} |
| Service request generation (auxiliary)
Definition in Ifx_DSADC.FCFGA.B.ESEL. More...
|
|
enum | IfxDsadc_AuxGate {
IfxDsadc_AuxGate_definedByESEL = 0,
IfxDsadc_AuxGate_coupledToIntegrator = 1
} |
| Service request generation (auxiliary)
Definition in Ifx_DSADC.FCFGA.B.EGT. More...
|
|
enum | IfxDsadc_AuxServiceRequest {
IfxDsadc_AuxServiceRequest_never = 0,
IfxDsadc_AuxServiceRequest_auxFilter = 1,
IfxDsadc_AuxServiceRequest_altSource = 2
} |
| Service request generation (auxiliary)
Definition in Ifx_DSADC.FCFGA.B.SRGA. More...
|
|
enum | IfxDsadc_CarrierWaveformMode {
IfxDsadc_CarrierWaveformMode_stopped = 0,
IfxDsadc_CarrierWaveformMode_square = 1,
IfxDsadc_CarrierWaveformMode_triangle = 2,
IfxDsadc_CarrierWaveformMode_sine = 3
} |
| Carrier generation mode
Definition in Ifx_DSADC.CGCFG.B.CGMOD. More...
|
|
enum | IfxDsadc_ChannelId {
IfxDsadc_ChannelId_0 = 0,
IfxDsadc_ChannelId_1 = 1,
IfxDsadc_ChannelId_2 = 2,
IfxDsadc_ChannelId_3 = 3,
IfxDsadc_ChannelId_4 = 4,
IfxDsadc_ChannelId_5 = 5,
IfxDsadc_ChannelId_6 = 6,
IfxDsadc_ChannelId_7 = 7,
IfxDsadc_ChannelId_8 = 8,
IfxDsadc_ChannelId_9 = 9
} |
| Specifies the channel Index. More...
|
|
enum | IfxDsadc_CommonModeVoltage {
IfxDsadc_CommonModeVoltage_a = 0,
IfxDsadc_CommonModeVoltage_b = 1,
IfxDsadc_CommonModeVoltage_c = 2
} |
| Modulator common mode voltage selection
Definition in Ifx_DSADC.MODCFGx.B.CMVS. More...
|
|
enum | IfxDsadc_FirDataShift {
IfxDsadc_FirDataShift_noShift = 0,
IfxDsadc_FirDataShift_shiftBy1 = 1,
IfxDsadc_FirDataShift_shiftBy2 = 2,
IfxDsadc_FirDataShift_shiftBy3 = 3
} |
| FIR data shift control
Selects the displacement caused by the data shifter at the FIR filter output
Definition in Ifx_DSADC.FCFGM.B.DSH. More...
|
|
enum | IfxDsadc_FirInternalShift {
IfxDsadc_FirInternalShift_noShift = 0,
IfxDsadc_FirInternalShift_shiftBy1 = 1
} |
| FIR shift control
Selects the displacement caused by the data shifter inbetween the FIR filter blocks.
Definition in Ifx_DSADC.FCFGM.B.FSH. More...
|
|
enum | IfxDsadc_InputConfig {
IfxDsadc_InputConfig_inputPin = 0,
IfxDsadc_InputConfig_supplyVoltage = 1,
IfxDsadc_InputConfig_commonModeVoltage = 2,
IfxDsadc_InputConfig_referenceGround = 3
} |
| Modulator configuration of positive/negative input line
Definition in Ifx_DSADC.MODCFGx.B.INCFGP and Ifx_DSADC.MODCFGx.B.INCFGN. More...
|
|
enum | IfxDsadc_InputDataSource {
IfxDsadc_InputDataSource_onChipStandAlone = 0,
IfxDsadc_InputDataSource_onChipCombined = 1,
IfxDsadc_InputDataSource_directInputA = 2,
IfxDsadc_InputDataSource_invertedInputA = 3,
IfxDsadc_InputDataSource_directInputB = 4,
IfxDsadc_InputDataSource_invertedInputB = 5
} |
| Demodulator input data source selection
Definition in Ifx_DSADC.DICFG.B.DSRC. More...
|
|
enum | IfxDsadc_InputGain {
IfxDsadc_InputGain_factor1 = 0,
IfxDsadc_InputGain_factor2 = 1,
IfxDsadc_InputGain_factor4 = 2,
IfxDsadc_InputGain_factor8 = 3,
IfxDsadc_InputGain_factor16 = 4
} |
| Modulator gain select of analog input path
Definition in Ifx_DSADC.MODCFGx.B.GAINSEL. More...
|
|
enum | IfxDsadc_InputPin {
IfxDsadc_InputPin_a = 0,
IfxDsadc_InputPin_b = 1,
IfxDsadc_InputPin_c = 2,
IfxDsadc_InputPin_d = 3
} |
| Modulator input pin selection
Definition in Ifx_DSADC.MODCFGx.B.INMUX. More...
|
|
enum | IfxDsadc_IntegrationWindowSize {
IfxDsadc_IntegrationWindowSize_internalControl = 0,
IfxDsadc_IntegrationWindowSize_externalControl = 1
} |
| Integrator window size
Definition in Ifx_DSADC.IWCTR.B.IWS. More...
|
|
enum | IfxDsadc_IntegratorTrigger {
IfxDsadc_IntegratorTrigger_bypassed = 0,
IfxDsadc_IntegratorTrigger_fallingEdge = 1,
IfxDsadc_IntegratorTrigger_risingEdge = 2,
IfxDsadc_IntegratorTrigger_alwaysActive = 3
} |
| Integrator trigger mode
NOTE: switch-first to bypassed before using other mode
Definition in Ifx_DSADC.DICFG.B.ITRMODE. More...
|
|
enum | IfxDsadc_LowPowerSupply {
IfxDsadc_LowPowerSupply_5V = 0,
IfxDsadc_LowPowerSupply_3_3V = 1
} |
| Low power supply voltage select
Definition in Ifx_DSADC.GLOBCFG.B.LOSUP. More...
|
|
enum | IfxDsadc_MainCombFilterShift {
IfxDsadc_MainCombFilterShift_noShift = 0,
IfxDsadc_MainCombFilterShift_shiftBy1 = 1,
IfxDsadc_MainCombFilterShift_shiftBy2 = 2,
IfxDsadc_MainCombFilterShift_shiftBy3 = 3
} |
| Comb Filter (Main Chain) shift control
Definition in Ifx_DSADC.FCFGC.B.MFSC. More...
|
|
enum | IfxDsadc_MainCombFilterType {
IfxDsadc_MainCombFilterType_comb1 = 0,
IfxDsadc_MainCombFilterType_comb2 = 1,
IfxDsadc_MainCombFilterType_comb3 = 2,
IfxDsadc_MainCombFilterType_combF = 3
} |
| Comb Filter (Main Chain) configuration/type
Definition in Ifx_DSADC.FCFGC.B.CFMC. More...
|
|
enum | IfxDsadc_MainServiceRequest {
IfxDsadc_MainServiceRequest_never = 0,
IfxDsadc_MainServiceRequest_highGateSignal = 1,
IfxDsadc_MainServiceRequest_lowGateSignal = 2,
IfxDsadc_MainServiceRequest_everyNewResult = 3
} |
| Service request generation (main chain)
Definition in Ifx_DSADC.FCFGC.B.SRGM. More...
|
|
enum | IfxDsadc_ModulatorClock {
IfxDsadc_ModulatorClock_off = 0,
IfxDsadc_ModulatorClock_fDSD = 1,
IfxDsadc_ModulatorClock_fERAY = 2,
IfxDsadc_ModulatorClock_fOSC0 = 3
} |
| Modulator clock select
Definition in Ifx_DSADC.GLOBCFG.B.MCSEL. More...
|
|
enum | IfxDsadc_ModulatorClockDivider {
IfxDsadc_ModulatorClockDivider_div2 = 0,
IfxDsadc_ModulatorClockDivider_div4,
IfxDsadc_ModulatorClockDivider_div6,
IfxDsadc_ModulatorClockDivider_div8,
IfxDsadc_ModulatorClockDivider_div10,
IfxDsadc_ModulatorClockDivider_div12,
IfxDsadc_ModulatorClockDivider_div14,
IfxDsadc_ModulatorClockDivider_div16,
IfxDsadc_ModulatorClockDivider_div18,
IfxDsadc_ModulatorClockDivider_div20,
IfxDsadc_ModulatorClockDivider_div22,
IfxDsadc_ModulatorClockDivider_div24,
IfxDsadc_ModulatorClockDivider_div26,
IfxDsadc_ModulatorClockDivider_div28,
IfxDsadc_ModulatorClockDivider_div30,
IfxDsadc_ModulatorClockDivider_div32
} |
| Modulator divider factor for modulator clock
Definition in Ifx_DSADC.MODCFGx.B.DIVM. More...
|
|
enum | IfxDsadc_RectifierSignSource {
IfxDsadc_RectifierSignSource_onChipGenerator = 0,
IfxDsadc_RectifierSignSource_nextChannel = 1,
IfxDsadc_RectifierSignSource_externalA = 2,
IfxDsadc_RectifierSignSource_externalB = 3
} |
| Rectifier sign source
Selects the sign signal that is to be delayed.
Definition in Ifx_DSADC.RECT.B.SSRC. More...
|
|
enum | IfxDsadc_SampleClockSource {
IfxDsadc_SampleClockSource_internal = 0,
IfxDsadc_SampleClockSource_inputA = 1,
IfxDsadc_SampleClockSource_inputB = 2,
IfxDsadc_SampleClockSource_inputC = 3
} |
| Demodulator sample clock source select
Definition in Ifx_DSADC.DICFG.B.CSRC. More...
|
|
enum | IfxDsadc_SampleStrobe {
IfxDsadc_SampleStrobe_noDataStrobe = 0,
IfxDsadc_SampleStrobe_sampleOnRisingEdge = 1,
IfxDsadc_SampleStrobe_sampleOnFallingEdge = 2,
IfxDsadc_SampleStrobe_sampleOnBothEdges = 3,
IfxDsadc_SampleStrobe_reserved = 4,
IfxDsadc_SampleStrobe_sampleOnTwoRisingEdges = 5,
IfxDsadc_SampleStrobe_sampleOnTwoFallingEdges = 6
} |
| Demodulator data strobe generation mode
Definition in Ifx_DSADC.DICFG.B.STROBE. More...
|
|
enum | IfxDsadc_SleepMode {
IfxDsadc_SleepMode_enable = 0,
IfxDsadc_SleepMode_disable = 1
} |
| Enable/disable the sensitivity of the module to sleep signal
Definition in Ifx_DSADC.CLC.B.EDIS. More...
|
|
enum | IfxDsadc_TimestampTrigger {
IfxDsadc_TimestampTrigger_noTrigger = 0,
IfxDsadc_TimestampTrigger_fallingEdge = 1,
IfxDsadc_TimestampTrigger_risingEdge = 2,
IfxDsadc_TimestampTrigger_eachEdge = 3
} |
| Timestamp trigger mode
Definition in Ifx_DSADC.DICFG.B.TSTRMODE. More...
|
|
enum | IfxDsadc_TriggerInput {
IfxDsadc_TriggerInput_a = 0,
IfxDsadc_TriggerInput_b = 1,
IfxDsadc_TriggerInput_c = 2,
IfxDsadc_TriggerInput_d = 3,
IfxDsadc_TriggerInput_e = 4,
IfxDsadc_TriggerInput_f = 5,
IfxDsadc_TriggerInput_g = 6,
IfxDsadc_TriggerInput_h = 7
} |
| Trigger select
Definition in Ifx_DSADC.DICFG.B.TRSEL. More...
|
|
|
IFX_INLINE void | IfxDsadc_setSleepMode (Ifx_DSADC *dsadc, IfxDsadc_SleepMode mode) |
| Sets the sensitivity of the module to sleep signal. More...
|
|
IFX_INLINE void | IfxDsadc_startScan (Ifx_DSADC *dsadc, uint32 modulatorMask, uint32 channelMask) |
| Enables the conversion of multiple channels. More...
|
|
IFX_INLINE void | IfxDsadc_stopScan (Ifx_DSADC *dsadc, uint32 modulatorMask) |
| Disables the conversion of multiple channels. More...
|
|
IFX_EXTERN void | IfxDsadc_resetModule (Ifx_DSADC *dsadc) |
| resets the DSADC kernel More...
|
|
IFX_INLINE sint16 | IfxDsadc_getAuxResult (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Get result from the auxiliary chain. More...
|
|
IFX_INLINE uint16 | IfxDsadc_getMainCombDecimation (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Get the main comb decimation factor. More...
|
|
IFX_INLINE sint16 | IfxDsadc_getMainResult (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Get result from the main chain. More...
|
|
IFX_INLINE boolean | IfxDsadc_isModuleEnabled (Ifx_DSADC *dsadc) |
| Return TRUE if DSADC module is enabled. More...
|
|
IFX_INLINE void | IfxDsadc_setCarrierMode (Ifx_DSADC *dsadc, IfxDsadc_CarrierWaveformMode waveformMode) |
| Set the carrier waveform mode. More...
|
|
IFX_EXTERN float32 | IfxDsadc_getIntegratorOutFreq (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Get the sample frequency of the integrator output in Hz. More...
|
|
IFX_EXTERN float32 | IfxDsadc_getMainCombOutFreq (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Get the sample frequency of the main COMB filter output in Hz. More...
|
|
IFX_EXTERN float32 | IfxDsadc_getMainGroupDelay (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Estimate the group delay of main-chain filters in seconds. More...
|
|
IFX_EXTERN float32 | IfxDsadc_getModulatorClockFreq (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Get the modulator clock frequency in Hz. More...
|
|
IFX_EXTERN float32 | IfxDsadc_getModulatorInputClockFreq (Ifx_DSADC *dsadc) |
| Get the input frequency of DSADC in Hz. More...
|
|
IFX_EXTERN volatile Ifx_SRC_SRCR * | IfxDsadc_getAuxSrc (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Address/pointer to the interrupt source register. More...
|
|
IFX_EXTERN volatile Ifx_SRC_SRCR * | IfxDsadc_getMainSrc (Ifx_DSADC *dsadc, IfxDsadc_ChannelId channel) |
| Get the interrupt source register for a Main event. More...
|
|
IFX_INLINE void | IfxDsadc_initCgPwmPin (const IfxDsadc_Cgpwm_Out *cgPwm, IfxPort_OutputMode pinMode, IfxPort_PadDriver padDriver) |
| Initializes a CGPWM output. More...
|
|
IFX_INLINE void | IfxDsadc_initCinPin (const IfxDsadc_Cin_In *cIn, IfxPort_InputMode cInMode) |
| Initializes a CIN input. More...
|
|
IFX_INLINE void | IfxDsadc_initCoutPin (const IfxDsadc_Cout_Out *cout, IfxPort_OutputMode pinMode, IfxPort_PadDriver padDriver) |
| Initializes a COUT output. More...
|
|
IFX_INLINE void | IfxDsadc_initDinPin (const IfxDsadc_Din_In *dIn, IfxPort_InputMode dInMode) |
| Initializes a DIN input. More...
|
|
IFX_INLINE void | IfxDsadc_initDsnPin (const IfxDsadc_Dsn_In *dsn, IfxPort_InputMode pinMode) |
| Initializes a DS input. More...
|
|
IFX_INLINE void | IfxDsadc_initDspPin (const IfxDsadc_Dsp_In *dsp, IfxPort_InputMode pinMode) |
| Initializes a DS input. More...
|
|
IFX_INLINE void | IfxDsadc_initItrPin (const IfxDsadc_Itr_In *itr, IfxPort_InputMode itrMode) |
| Initializes a ITR input. More...
|
|
IFX_INLINE void | IfxDsadc_initSgPin (const IfxDsadc_Sg_In *sg, IfxPort_InputMode pinMode) |
| Initializes a SG input. More...
|
|
DSADC basic functionality.
- Version
- iLLD_1_0_0_11_0
- Copyright
- Copyright (c) 2013 Infineon Technologies AG. All rights reserved.
IMPORTANT NOTICE
Infineon Technologies AG (Infineon) is supplying this file for use exclusively with Infineon's microcontroller products. This file can be freely distributed within development tools that are supporting such microcontroller products.
THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. INFINEON SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
Definition in file IfxDsadc.h.