- Generated by
1.8.4
|
iLLD_TC29x
1.0
|
CCU6 basic functionality. More...
#include "IfxCcu6.h"Go to the source code of this file.
Functions | |
| void | IfxCcu6_connectTrigger (Ifx_CCU6 *ccu6, IfxCcu6_TrigOut outputLine, IfxCcu6_TrigSel selectedTrigger) |
| void | IfxCcu6_disableModulationOutput (Ifx_CCU6 *ccu6, IfxCcu6_TimerId timer, IfxCcu6_ChannelOut channelOut) |
| Disables the modulation of the corresponding output signal by PWM pattern generated by the timers T12 and T13. More... | |
| void | IfxCcu6_enableModulationOutput (Ifx_CCU6 *ccu6, IfxCcu6_TimerId timer, IfxCcu6_ChannelOut channelOut) |
| Enables the modulation of the corresponding output signal by PWM pattern generated by the timers T12 and T13. More... | |
| void | IfxCcu6_enableModule (Ifx_CCU6 *ccu6) |
| Enables the selected CCU6 kernel. More... | |
| uint32 | IfxCcu6_getCaptureRegisterValue (Ifx_CCU6 *ccu6, IfxCcu6_T12Channel channel) |
| Returns the capture register value of the selected channel. More... | |
| uint32 | IfxCcu6_getCaptureShadowRegisterValue (Ifx_CCU6 *ccu6, IfxCcu6_T12Channel channel) |
| Returns the capture shadow register value of the selected channel. More... | |
| sint32 | IfxCcu6_getIndex (Ifx_CCU6 *ccu6) |
| Returns CCU6 index. More... | |
| volatile Ifx_SRC_SRCR * | IfxCcu6_getSrcAddress (Ifx_CCU6 *ccu6, IfxCcu6_ServiceRequest serviceRequest) |
| Returns the service request register. More... | |
| uint32 | IfxCcu6_readTimer (Ifx_CCU6 *ccu6, IfxCcu6_TimerId timer) |
| Returns the current value of the timer register. More... | |
| void | IfxCcu6_resetModule (Ifx_CCU6 *ccu6) |
| void | IfxCcu6_routeInterruptNode (Ifx_CCU6 *ccu6, IfxCcu6_InterruptSource source, IfxCcu6_ServiceRequest serviceRequest) |
| Routes the interrupt node pointer to the selected service requests. More... | |
| void | IfxCcu6_setOutputPassiveLevel (Ifx_CCU6 *ccu6, IfxCcu6_ChannelOut channelOut, boolean state) |
| Sets the passive state level of the PWM outputs of the module. More... | |
| void | IfxCcu6_setT12CaptureCompareState (Ifx_CCU6 *ccu6, IfxCcu6_T12Channel channel, IfxCcu6_CaptureCompareState state) |
| Sets software-control (independent set and clear conditions) for the Timer12 channel state bits CC6xST (x=0,1,2) More... | |
| void | IfxCcu6_setT12CompareValue (Ifx_CCU6 *ccu6, IfxCcu6_T12Channel channel, uint16 value) |
| Sets the 16-bit compare value of Timer12 (writes into shadow registers) More... | |
| float32 | IfxCcu6_setT12Frequency (Ifx_CCU6 *ccu6, float32 frequency, Ifx_TimerValue resolution, IfxCcu6_T12CountMode countMode) |
| Sets the frequency and clock input of the Timer 12. More... | |
| void | IfxCcu6_setT12InputSignal (Ifx_CCU6 *ccu6, IfxCcu6_T12hr_In *extInput) |
| selects the actual input signal for the timer inputs. More... | |
| void | IfxCcu6_setT13CaptureCompareState (Ifx_CCU6 *ccu6, IfxCcu6_CaptureCompareState state) |
| Sets software-control (independent set and clear conditions) for the Timer13 channel state bits CC63ST. More... | |
| float32 | IfxCcu6_setT13Frequency (Ifx_CCU6 *ccu6, float32 frequency, Ifx_TimerValue resolution) |
| Sets the frequency and clock input of the Timer 13. More... | |
| void | IfxCcu6_setT13InputSignal (Ifx_CCU6 *ccu6, IfxCcu6_T13hr_In *extInput) |
| selects the actual input signal for the timer inputs. More... | |
CCU6 basic functionality.
IMPORTANT NOTICE
Infineon Technologies AG (Infineon) is supplying this file for use exclusively with Infineon's microcontroller products. This file can be freely distributed within development tools that are supporting such microcontroller products.
THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. INFINEON SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
Definition in file IfxCcu6.c.
1.8.4