|
enum | IfxEray_Baudrate {
IfxEray_Baudrate_10 = 0,
IfxEray_Baudrate_5 = 1,
IfxEray_Baudrate_2_5 = 2
} |
| Baudrate on the flexray bus, defined in MODULE_ERAY0.PRTC1.B.BRP. More...
|
|
enum | IfxEray_BufferDirection {
IfxEray_BufferDirection_receive = 0,
IfxEray_BufferDirection_transmit = 1
} |
| wheather transmit buffer or receive buffer, defined in MODULE_ERAY0.WRHS1.B.CFG. More...
|
|
enum | IfxEray_Channel {
IfxEray_Channel_a = 0,
IfxEray_Channel_b = 1
} |
| Channel Id. More...
|
|
enum | IfxEray_ClearErrorFlag {
IfxEray_ClearErrorFlag_pemc = 1,
IfxEray_ClearErrorFlag_cna = 2,
IfxEray_ClearErrorFlag_sfbm = 4,
IfxEray_ClearErrorFlag_sfo = 8,
IfxEray_ClearErrorFlag_ccf = 16,
IfxEray_ClearErrorFlag_ccl = 32,
IfxEray_ClearErrorFlag_eerr = 64,
IfxEray_ClearErrorFlag_rfo = 128,
IfxEray_ClearErrorFlag_efa = 256,
IfxEray_ClearErrorFlag_iiba = 512,
IfxEray_ClearErrorFlag_ioba = 1024,
IfxEray_ClearErrorFlag_mhf = 2048,
IfxEray_ClearErrorFlag_eda = 65536,
IfxEray_ClearErrorFlag_ltva = 131072,
IfxEray_ClearErrorFlag_taba = 262144,
IfxEray_ClearErrorFlag_edb = 16777216,
IfxEray_ClearErrorFlag_ltvb = 33554432,
IfxEray_ClearErrorFlag_tabb = 67108864
} |
| Selection of error flag to clear defined in MODULE_ERAY.EIR.U. More...
|
|
enum | IfxEray_ClearStatusFlag {
IfxEray_ClearStatusFlag_wst = 1,
IfxEray_ClearStatusFlag_cas = 2,
IfxEray_ClearStatusFlag_cycs = 4,
IfxEray_ClearStatusFlag_txi = 8,
IfxEray_ClearStatusFlag_rxi = 16,
IfxEray_ClearStatusFlag_rfne = 32,
IfxEray_ClearStatusFlag_rfcl = 64,
IfxEray_ClearStatusFlag_nmvc = 128,
IfxEray_ClearStatusFlag_ti0 = 256,
IfxEray_ClearStatusFlag_ti1 = 512,
IfxEray_ClearStatusFlag_tibc = 1024,
IfxEray_ClearStatusFlag_tobc = 2048,
IfxEray_ClearStatusFlag_swe = 4096,
IfxEray_ClearStatusFlag_sucs = 8192,
IfxEray_ClearStatusFlag_mbsi = 16384,
IfxEray_ClearStatusFlag_sds = 32768,
IfxEray_ClearStatusFlag_wupa = 65536,
IfxEray_ClearStatusFlag_mtsa = 131072,
IfxEray_ClearStatusFlag_wupb = 16777216,
IfxEray_ClearStatusFlag_mtsb = 33554432
} |
| Selection of status flag to clear defined in MODULE_ERAY.SIR.U. More...
|
|
enum | IfxEray_ClockDivider {
IfxEray_ClockDivider_none = 0,
IfxEray_ClockDivider_1 = 1,
IfxEray_ClockDivider_2,
IfxEray_ClockDivider_3,
IfxEray_ClockDivider_4,
IfxEray_ClockDivider_5,
IfxEray_ClockDivider_6,
IfxEray_ClockDivider_7
} |
| Clock divider in RUN mode, defined in MODULE_ERAY0.B.RMC. More...
|
|
enum | IfxEray_ExternalOffset {
IfxEray_ExternalOffset_noCorrection = 1,
IfxEray_ExternalOffset_correctionSubtracted = 2,
IfxEray_ExternalOffset_correctionAdded = 3
} |
| External offset correction control defined in MODULE_ERAY0.GTU11.B.EOCC. More...
|
|
enum | IfxEray_ExternalOffsetCorrection {
IfxEray_ExternalOffsetCorrection_0 = 0,
IfxEray_ExternalOffsetCorrection_1,
IfxEray_ExternalOffsetCorrection_2,
IfxEray_ExternalOffsetCorrection_3,
IfxEray_ExternalOffsetCorrection_4,
IfxEray_ExternalOffsetCorrection_5,
IfxEray_ExternalOffsetCorrection_6,
IfxEray_ExternalOffsetCorrection_7
} |
| External clock offset correction value defined in MODULE_ERAY0.GTU11.B.EOC. More...
|
|
enum | IfxEray_ExternalRate {
IfxEray_ExternalRate_noCorrection = 1,
IfxEray_ExternalRate_correctionSubtracted = 2,
IfxEray_ExternalRate_correctionAdded = 3
} |
| External rate correction control MODULE_ERAY0.GTU11.B.ERCC. More...
|
|
enum | IfxEray_ExternalRateCorrection {
IfxEray_ExternalRateCorrection_0 = 0,
IfxEray_ExternalRateCorrection_1,
IfxEray_ExternalRateCorrection_2,
IfxEray_ExternalRateCorrection_3,
IfxEray_ExternalRateCorrection_4,
IfxEray_ExternalRateCorrection_5,
IfxEray_ExternalRateCorrection_6,
IfxEray_ExternalRateCorrection_7
} |
| External clock rate correction value defined in MODULE_ERAY0.GTU11.B.ERC. More...
|
|
enum | IfxEray_IdleDynamicSlots {
IfxEray_IdleDynamicSlots_0 = 0,
IfxEray_IdleDynamicSlots_1,
IfxEray_IdleDynamicSlots_2
} |
| Duration of dynamic slot idle phase, defined in MODULE_ERAY0.B.DSI. More...
|
|
enum | IfxEray_ListenTimeOutNoise {
IfxEray_ListenTimeOutNoise_2 = 1,
IfxEray_ListenTimeOutNoise_3,
IfxEray_ListenTimeOutNoise_4,
IfxEray_ListenTimeOutNoise_5,
IfxEray_ListenTimeOutNoise_6,
IfxEray_ListenTimeOutNoise_7,
IfxEray_ListenTimeOutNoise_8,
IfxEray_ListenTimeOutNoise_9,
IfxEray_ListenTimeOutNoise_10,
IfxEray_ListenTimeOutNoise_11,
IfxEray_ListenTimeOutNoise_12,
IfxEray_ListenTimeOutNoise_13,
IfxEray_ListenTimeOutNoise_14,
IfxEray_ListenTimeOutNoise_15,
IfxEray_ListenTimeOutNoise_16
} |
| Wakeup or Startup listen timeout in presence of noise, defined in MODULE_ERAY0.SUCC2.B.LTN. More...
|
|
enum | IfxEray_MaxSynchFrames {
IfxEray_MaxSynchFrames_2 = 2,
IfxEray_MaxSynchFrames_3,
IfxEray_MaxSynchFrames_4,
IfxEray_MaxSynchFrames_5,
IfxEray_MaxSynchFrames_6,
IfxEray_MaxSynchFrames_7,
IfxEray_MaxSynchFrames_8,
IfxEray_MaxSynchFrames_9,
IfxEray_MaxSynchFrames_10,
IfxEray_MaxSynchFrames_11,
IfxEray_MaxSynchFrames_12,
IfxEray_MaxSynchFrames_13,
IfxEray_MaxSynchFrames_14,
IfxEray_MaxSynchFrames_15
} |
| Maximum number of sync frames in a cluster defined in MODULE_ERAY0.GTU02.B.SNM. More...
|
|
enum | IfxEray_PocCommand {
IfxEray_PocCommand_notAccepted = 0,
IfxEray_PocCommand_config = 1,
IfxEray_PocCommand_ready = 2,
IfxEray_PocCommand_wakeup = 3,
IfxEray_PocCommand_run = 4,
IfxEray_PocCommand_allSlots = 5,
IfxEray_PocCommand_halt = 6,
IfxEray_PocCommand_freeze = 7,
IfxEray_PocCommand_sendMts = 8,
IfxEray_PocCommand_coldStart = 9,
IfxEray_PocCommand_reset = 10,
IfxEray_PocCommand_monitor = 11,
IfxEray_PocCommand_clearRam = 12
} |
| Commmand to control the Communication, defined in MODULE_ERAY0.SUCC1.B.CMD. More...
|
|
enum | IfxEray_PocState {
IfxEray_PocState_defaultConfig = 0,
IfxEray_PocState_ready = 1,
IfxEray_PocState_normalActive = 2,
IfxEray_PocState_normalPassive = 3,
IfxEray_PocState_halt = 4,
IfxEray_PocState_monitor = 5,
IfxEray_PocState_config = 15,
IfxEray_PocState_wakeupStandby = 16,
IfxEray_PocState_wakeupListen = 17,
IfxEray_PocState_wakeupSend = 18,
IfxEray_PocState_wakeupDetect = 19,
IfxEray_PocState_startup = 32,
IfxEray_PocState_coldStartListen = 33,
IfxEray_PocState_collisionResolution = 34,
IfxEray_PocState_consistencyCheck = 35,
IfxEray_PocState_gap = 36,
IfxEray_PocState_join = 37,
IfxEray_PocState_integrationCheck = 38,
IfxEray_PocState_integrationListen = 39,
IfxEray_PocState_integrationConsistencyCheck = 40,
IfxEray_PocState_initializeSchedule = 41,
IfxEray_PocState_staruAborted = 42,
IfxEray_PocState_startupSucced = 43
} |
| State of Communication Controller Protocol operation control, defined in MODULE_ERAY0.CCSV.B.POCS. More...
|
|
enum | IfxEray_ReceiveChannel {
IfxEray_ReceiveChannel_both = 0,
IfxEray_ReceiveChannel_b = 1,
IfxEray_ReceiveChannel_a = 2,
IfxEray_ReceiveChannel_none = 3
} |
| Receiving channel, defined in MODULE_ERAY0.FRF.B.CH. More...
|
|
enum | IfxEray_SleepMode {
IfxEray_SleepMode_enable = 0,
IfxEray_SleepMode_disable = 1
} |
| Enable/disable the sensitivity of the module to sleep signal
Definition in Ifx_ERAY.CLC.B.EDIS. More...
|
|
enum | IfxEray_StrobePosition {
IfxEray_StrobePosition_5 = 0,
IfxEray_StrobePosition_4 = 1,
IfxEray_StrobePosition_6 = 2
} |
| Sample count value for strobing, defined in MODULE_ERAY0.PRTC1.B.SPP. More...
|
|
enum | IfxEray_TransmissionMode {
IfxEray_TransmissionMode_continuous = 0,
IfxEray_TransmissionMode_singleShot = 1
} |
| Transmission mode of Header, defined in MODULE_ERAY0.WRHS1.B.TXM. More...
|
|
enum | IfxEray_TransmissionSlotMode {
IfxEray_TransmissionSlotMode_all = 0,
IfxEray_TransmissionSlotMode_single = 1
} |
| Initial transmission mode, defined in MODULE_ERAY0.SUCC1.B.TSM. More...
|
|
enum | IfxEray_WakeupChannel {
IfxEray_WakeupChannel_a = 0,
IfxEray_WakeupChannel_b = 1
} |
| Wakeup pattern carry channel, defined in MODULE_ERAY0.SUCC1.B.WUCS. More...
|
|