IOM basic functionality. More...

#include "_Impl/IfxIom_cfg.h"
#include "IfxIom_reg.h"
#include "Scu/Std/IfxScuWdt.h"
#include "Cpu/Std/IfxCpu_Intrinsics.h"

Enumerations
enum	IfxIom_EdgeClearType { IfxIom_EdgeClearType_rising = 0, IfxIom_EdgeClearType_falling = 1, IfxIom_EdgeClearType_risingFalling = 2 }
	Specifies the edge type which need to be cleared. More...

enum	IfxIom_EventActiveEdgeSelection { IfxIom_EventActiveEdgeSelection_neitherGateNeitherClear = 0, IfxIom_EventActiveEdgeSelection_neitherGatePositiveClear = 1, IfxIom_EventActiveEdgeSelection_neitherGateNegativeClear = 2, IfxIom_EventActiveEdgeSelection_neitherGateEitherClear = 3, IfxIom_EventActiveEdgeSelection_positiveGateNeitherClear = 4, IfxIom_EventActiveEdgeSelection_positiveGatePositiveClear = 5, IfxIom_EventActiveEdgeSelection_positiveGateNegativeClear = 6, IfxIom_EventActiveEdgeSelection_positiveGateEitherClear = 7, IfxIom_EventActiveEdgeSelection_negativeGateNeitherClear = 8, IfxIom_EventActiveEdgeSelection_negativeGatePositiveClear = 9, IfxIom_EventActiveEdgeSelection_negativeGateNegativeClear = 10, IfxIom_EventActiveEdgeSelection_negativeGateEitherClear = 11, IfxIom_EventActiveEdgeSelection_eitherGateNeitherClear = 12, IfxIom_EventActiveEdgeSelection_eitherGatePositiveClear = 13, IfxIom_EventActiveEdgeSelection_eitherGateNegativeClear = 14, IfxIom_EventActiveEdgeSelection_eitherGateEitherClear = 15 }
	LAMCFG[lamId].EDS, Specifies which active edges of the monitor and reference signals are used for the event window generation. More...

enum	IfxIom_EventCounterChannel { IfxIom_EventCounterChannel_0 = 0, IfxIom_EventCounterChannel_1, IfxIom_EventCounterChannel_2, IfxIom_EventCounterChannel_3, IfxIom_EventCounterChannel_4, IfxIom_EventCounterChannel_5, IfxIom_EventCounterChannel_6, IfxIom_EventCounterChannel_7, IfxIom_EventCounterChannel_8, IfxIom_EventCounterChannel_9, IfxIom_EventCounterChannel_10, IfxIom_EventCounterChannel_11, IfxIom_EventCounterChannel_12, IfxIom_EventCounterChannel_13, IfxIom_EventCounterChannel_14, IfxIom_EventCounterChannel_15 }
	ECMCCFG.SELCx(x= 0,1,2,3), Specifies which channel event output is to be routed to counterCn. More...

enum	IfxIom_EventCounterThreshold { IfxIom_EventCounterThreshold_disable = 0, IfxIom_EventCounterThreshold_1 = 1, IfxIom_EventCounterThreshold_2, IfxIom_EventCounterThreshold_3, IfxIom_EventCounterThreshold_4, IfxIom_EventCounterThreshold_5, IfxIom_EventCounterThreshold_6, IfxIom_EventCounterThreshold_7, IfxIom_EventCounterThreshold_8, IfxIom_EventCounterThreshold_9, IfxIom_EventCounterThreshold_10, IfxIom_EventCounterThreshold_11, IfxIom_EventCounterThreshold_12, IfxIom_EventCounterThreshold_13, IfxIom_EventCounterThreshold_14, IfxIom_EventCounterThreshold_15 }
	ECMCCFG.THRCx(x= 0,1,2,3), Specifies the threshold count value. Upon the counter meeting the threshold, the counter event output becomes active high. More...

enum	IfxIom_EventSource { IfxIom_EventSource_reference = 0, IfxIom_EventSource_monitor = 1 }
	LAMCFG[lamId].EWS, Specifies whether the event window generation is from the monitor or reference signal. More...

enum	IfxIom_FilterMode { IfxIom_FilterMode_delayedDebounce = 0, IfxIom_FilterMode_immediateDebounce = 1, IfxIom_FilterMode_risingEdgeImmediateDebounce = 2, IfxIom_FilterMode_fallingEdgeImmediateDebounce = 3, IfxIom_FilterMode_risingEdgeDelayedFallingEdgeImmediateDebounce = 4, IfxIom_FilterMode_fallingEdgeDelayedRisingEdgeImmediateDebounce = 5, IfxIom_FilterMode_risingEdgePrescaler = 6, IfxIom_FilterMode_FallingEdgePrescaler = 7 }
	FPCCTR[channelId].MOD, Specifies the Filter & Prescaler Cell mode. More...

enum	IfxIom_FpcChannelId { IfxIom_FpcChannelId_0 = 0, IfxIom_FpcChannelId_1, IfxIom_FpcChannelId_2, IfxIom_FpcChannelId_3, IfxIom_FpcChannelId_4, IfxIom_FpcChannelId_5, IfxIom_FpcChannelId_6, IfxIom_FpcChannelId_7, IfxIom_FpcChannelId_8, IfxIom_FpcChannelId_9, IfxIom_FpcChannelId_10, IfxIom_FpcChannelId_11, IfxIom_FpcChannelId_12, IfxIom_FpcChannelId_13, IfxIom_FpcChannelId_14, IfxIom_FpcChannelId_15 }
	Specifies the number of Filter & Prescaler Cell channel Id. More...

enum	IfxIom_LamMonitorInputChannel { IfxIom_LamMonitorInputChannel_0 = 0, IfxIom_LamMonitorInputChannel_1, IfxIom_LamMonitorInputChannel_2, IfxIom_LamMonitorInputChannel_3, IfxIom_LamMonitorInputChannel_4, IfxIom_LamMonitorInputChannel_5, IfxIom_LamMonitorInputChannel_6, IfxIom_LamMonitorInputChannel_7, IfxIom_LamMonitorInputChannel_8, IfxIom_LamMonitorInputChannel_9, IfxIom_LamMonitorInputChannel_10, IfxIom_LamMonitorInputChannel_11, IfxIom_LamMonitorInputChannel_12, IfxIom_LamMonitorInputChannel_13, IfxIom_LamMonitorInputChannel_14, IfxIom_LamMonitorInputChannel_15 }
	LAMCFG[lamId].MCS, Specifies which FPC/mux block monitor output signal is to be used for LAM block. More...

enum	IfxIom_LamMonitorSource { IfxIom_LamMonitorSource_directFpcMonitor = 0, IfxIom_LamMonitorSource_exoredFpcMonitor = 1 }
	LAMCFG[lamId].MOS, Specifies whether the monitor signal from the FPC monitor channel is sourced directly or compared with the reference signal from the FPC reference channel for the event compare. More...

enum	IfxIom_LamReferenceInputChannel { IfxIom_LamReferenceInputChannel_0 = 0, IfxIom_LamReferenceInputChannel_1, IfxIom_LamReferenceInputChannel_2, IfxIom_LamReferenceInputChannel_3, IfxIom_LamReferenceInputChannel_4, IfxIom_LamReferenceInputChannel_5, IfxIom_LamReferenceInputChannel_6, IfxIom_LamReferenceInputChannel_7, IfxIom_LamReferenceInputChannel_8, IfxIom_LamReferenceInputChannel_9, IfxIom_LamReferenceInputChannel_10, IfxIom_LamReferenceInputChannel_11, IfxIom_LamReferenceInputChannel_12, IfxIom_LamReferenceInputChannel_13, IfxIom_LamReferenceInputChannel_14, IfxIom_LamReferenceInputChannel_15 }
	LAMCFG[lamId].RCS, Specifies which FPC/mux block reference output signal is to be used for LAM block. More...

enum	IfxIom_LamRunMode { IfxIom_LamRunMode_freeRunning = 0, IfxIom_LamRunMode_gated = 1 }
	LAMCFG[lamId].RMS, Specifies whether the event window generation is free-running or gated with the monitor or reference. More...

enum	IfxIom_MonitorSignal { IfxIom_MonitorSignal_portLogic = 0, IfxIom_MonitorSignal_0 = 1, IfxIom_MonitorSignal_1, IfxIom_MonitorSignal_2 }
	FPCCTR[channelId].ISM, Specifies the monitor signal input for Filter & Prescaler cell. More...

enum	IfxIom_ReferenceSignal { IfxIom_ReferenceSignal_portLogic = 0, IfxIom_ReferenceSignal_0 = 1, IfxIom_ReferenceSignal_1, IfxIom_ReferenceSignal_2, IfxIom_ReferenceSignal_gtmEXORCombiner = 4 }
	FPCCTR[channelId].ISR,Specifies the reference signal input for Filter & Prescaler cell. More...

enum	IfxIom_SleepMode { IfxIom_SleepMode_enable = 0, IfxIom_SleepMode_disable = 1 }
	Enable/disable the sensitivity of the module to sleep signal Definition in Ifx_IOM.CLC.B.EDIS. More...

enum	IfxIom_LamId { IfxIom_LamId_0 = 0, IfxIom_LamId_1, IfxIom_LamId_2, IfxIom_LamId_3, IfxIom_LamId_4, IfxIom_LamId_5, IfxIom_LamId_6, IfxIom_LamId_7, IfxIom_LamId_8, IfxIom_LamId_9, IfxIom_LamId_10, IfxIom_LamId_11, IfxIom_LamId_12, IfxIom_LamId_13, IfxIom_LamId_14, IfxIom_LamId_15 }
	Specifies the Logic Module Analyser Module Number. More...

Functions
IFX_INLINE void	IfxIom_enableModule (Ifx_IOM *iom)
	Enable the IOM module control. More...

IFX_EXTERN void	IfxIom_resetModule (Ifx_IOM *iom)
	Reset the IOM module. More...

IFX_INLINE void	IfxIom_setSleepMode (Ifx_IOM *iom, IfxIom_SleepMode mode)
	Enable/disable the sensitivity of the module to sleep signal. More...

IFX_INLINE uint16	IfxIom_eventTriggerHistory (Ifx_IOM *iom)

Detailed Description

IOM basic functionality.

Version: iLLD_1_0_0_11_0

Copyright: Copyright (c) 2013 Infineon Technologies AG. All rights reserved.

                            IMPORTANT NOTICE

Infineon Technologies AG (Infineon) is supplying this file for use exclusively with Infineon's microcontroller products. This file can be freely distributed within development tools that are supporting such microcontroller products.

THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. INFINEON SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

Definition in file IfxIom.h.

Enumeration Type Documentation

enum IfxIom_LamId

Specifies the Logic Module Analyser Module Number.

Enumerator
IfxIom_LamId_0	Specifies the LAM Id 0.
IfxIom_LamId_1	Specifies the LAM Id 1.
IfxIom_LamId_2	Specifies the LAM Id 2.
IfxIom_LamId_3	Specifies the LAM Id 3.
IfxIom_LamId_4	Specifies the LAM Id 4.
IfxIom_LamId_5	Specifies the LAM Id 5.
IfxIom_LamId_6	Specifies the LAM Id 6.
IfxIom_LamId_7	Specifies the LAM Id 7.
IfxIom_LamId_8	Specifies the LAM Id 8.
IfxIom_LamId_9	Specifies the LAM Id 9.
IfxIom_LamId_10	Specifies the LAM Id 10.
IfxIom_LamId_11	Specifies the LAM Id 11.
IfxIom_LamId_12	Specifies the LAM Id 12.
IfxIom_LamId_13	Specifies the LAM Id 13.
IfxIom_LamId_14	Specifies the LAM Id 14.
IfxIom_LamId_15	Specifies the LAM Id 15.

Definition at line 264 of file IfxIom.h.

Function Documentation

IFX_INLINE uint16 IfxIom_eventTriggerHistory ( Ifx_IOM * iom)

Parameters

iom	pointer to IOM register space

Returns: the last generated event

Definition at line 345 of file IfxIom.h.

IFX_INLINE void IfxIom_setSleepMode	(	Ifx_IOM *	iom,
		IfxIom_SleepMode	mode
	)

Enable/disable the sensitivity of the module to sleep signal.

Parameters

iom	pointer to IOM registers
mode	mode selection (enable/disable)

Returns: None

Definition at line 336 of file IfxIom.h.

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

Function Documentation