IfxPort.c File Reference

PORT basic functionality. More...

#include "IfxPort.h"
#include "Cpu/Std/IfxCpu.h"
#include "Scu/Std/IfxScuWdt.h"

Go to the source code of this file.

Functions
boolean	IfxPort_disableEmergencyStop (Ifx_P *port, uint8 pinIndex)
	Disable the emergency stop function. This function disables the emergency stop function. A check is done on port functionality. More...
boolean	IfxPort_enableEmergencyStop (Ifx_P *port, uint8 pinIndex)
	Enable the emergency stop function. This function enables the emergency stop function. A check is done on port functionality. More...
sint32	IfxPort_getIndex (Ifx_P *port)
	Return port index within IfxModule_IndexMap (defined in IfxPort_cfg.c) More...
void	IfxPort_resetESR (Ifx_P *port, uint8 pinIndex)
	Disable the emergency stop function. This function disables the emergency stop function. No check is done on port functionality. More...
void	IfxPort_setESR (Ifx_P *port, uint8 pinIndex)
	Enable the emergency stop function. This function enables the emergency stop function. No check is done on port functionality. More...
void	IfxPort_setGroupModeInput (Ifx_P *port, uint8 pinIndex, uint16 mask, IfxPort_InputMode mode)
	Set pin modes to input at the pin location specified by '1' by the mask. More...
void	IfxPort_setGroupModeOutput (Ifx_P *port, uint8 pinIndex, uint16 mask, IfxPort_OutputMode mode, IfxPort_OutputIdx index)
	Set pin modes to output at the pin location specified by '1' by the mask starting at pinIndex. More...
void	IfxPort_setGroupPadDriver (Ifx_P *port, uint8 pinIndex, uint16 mask, IfxPort_PadDriver padDriver)
	Set pad driver strength at the pin location specified by '1' by the mask. More...
void	IfxPort_setPinMode (Ifx_P *port, uint8 pinIndex, IfxPort_Mode mode)
	Configure the port input / output mode. More...
void	IfxPort_setPinPadDriver (Ifx_P *port, uint8 pinIndex, IfxPort_PadDriver padDriver)
	Configure the pad driver mode. More...

Detailed Description

PORT basic functionality.

Version

iLLD_1_0_0_11_0

Copyright

Copyright (c) 2013 Infineon Technologies AG. All rights reserved.

                            IMPORTANT NOTICE

Infineon Technologies AG (Infineon) is supplying this file for use exclusively with Infineon's microcontroller products. This file can be freely distributed within development tools that are supporting such microcontroller products.

THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. INFINEON SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.

Definition in file IfxPort.c.

Function Documentation

void IfxPort_resetESR	(	Ifx_P *	port,
		uint8	pinIndex
	)

Disable the emergency stop function. This function disables the emergency stop function. No check is done on port functionality.

Parameters

port	Pointer to the port which should be accessed.
pinIndex	Specifies the pin for which the emergency stop function should be disabled.

Returns

None

See Also

IfxPort_disableEmergencyStop(), Ifx_P.ESR

Definition at line 98 of file IfxPort.c.

Referenced by IfxPort_disableEmergencyStop().

void IfxPort_setESR	(	Ifx_P *	port,
		uint8	pinIndex
	)

Enable the emergency stop function. This function enables the emergency stop function. No check is done on port functionality.

Parameters

port	Pointer to the port which should be accessed.
pinIndex	Specifies the pin for which the emergency stop function should be enabled.

Returns

None

See Also

IfxPort_enableEmergencyStop(), Ifx_P.ESR

Definition at line 108 of file IfxPort.c.

Referenced by IfxPort_enableEmergencyStop().